8341A SAM™ Studio Monitor
SAM™ Studio Monitor
Technical Specifications
High headroom three-way with unbelievable imaging. The 8341A is the point source monitor with the perfect blend of size and performance.
System Specifications
Frequency Response
45 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB38 Hz
High cutoff -6dB 37 kHz
SPL
Peak SPL≥118 dB
Maximum peak acoustic output per pair in a listening room with music material at 1 m.
Short term max SPL≥110 dB
Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
Long term max SPL≥101 dB
Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
Self-generated noise
Self-generated noise≤3 dB SPL
Self generated noise level in free space at 1 m on axis (A-weighted).
Weight
Weight
9.8 kg (21.6 lb)
Dimensions
Height 351 mm (13 7/8 in)
Height with Iso-Pod370 mm (14 5/8 in)
Width237 mm (9 3/8 in)
Depth243 mm (9 5/8 in)
Enclosure
Enclosure materialDie cast aluminium
Enclosure typeReflex port
Drivers
Bass
Driver typeRacetrack
8341A bass driver
Count2
Width170 mm (6 3/4 in)
Height 90 mm (3 1/2 in)
Midrange
Driver typeCoaxial
8341A midrange driver cone (coaxial)
Diameter90 mm (3 1/2 in)
Treble
Driver typeCoaxial
8341A treble driver metal dome (coaxial)
Diameter19 mm (3/4 in)
Directivity
Horizontal directivity
Vertical directivity
Harmonic distortion
50…100 Hz ≤2 %
> 100 Hz ≤0.5 %
Group delay
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF (top graph) 3.3 ms
Extended Phase Linearity in GLM set to ON (bottom graph) 7.0 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Amplifier Section
Amplifiers
8341 bass amplifier
250 W Class D
8341 midrange amplifier
150 W Class D
8341 treble amplifier
150 W Class D
Mains voltage
100-240 VAC 50/60Hz
Power consumption
ISS Active≤0.5 W
Idle≤16 W
Full output250 W
Signal processing section
Connectors
Input
Analog signal input connector XLR female, balanced 10 kOhm.
Input
Digital signal input connector XLR female 110 Ohm.
Output
Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control
Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Crossover
Bass/Mid500 Hz
Mid/Treble3000 Hz
Product Variants
Product codes
Code
Product information
EAN code
CN code
8341AW
8341A SAM™ Studio Monitor White
8341AP
8341A SAM™ Studio Monitor Dark Grey
8341AM
8341A SAM™ Studio Monitor Black
8341ARw
8341A SAM™ Studio Monitor RAW
Compatible Accessories
Product codes
Code
Product information
EAN code
CN code
8000-325B
8000-325B Table stand L-shape, Black
8000-400
8000-400 Genelec Design stand
8000-400W
8000-400 Genelec Design Stand White
8000-409BB
8000-409BB Floor Stand (950-1430 mm)
8000-409BW
8000-409BW Floor stand (950-1430 mm)
8040-408
8040-408 Stand plate for 8X40, 8341 Iso-Pod
8040-438W
8040-438W White stand plate for 8X40, 8341 Iso-Pod
8000-436B
8000-436B Short ceiling mount, Black
8000-436W
8000-436W Short ceiling mount, White
8000-442B
8000-442B Short adjustable ceiling mount, Black
8000-442W
8000-442W Short adjustable ceiling mount, White
8000-444B
8000-444B Long adjustable ceiling mount, Black
8000-444W
8000-444W Long adjustable ceiling mount, White
8000-446B
8000-446B Truss mount kit, adjustable length
8000-416B
8000-416B Short truss mount with clamp
8000-402B
8000-402B Wall mounting bracket, Black
8000-402W
8000-402W Wall mounting bracket, White
8000-841
8000-841 Empty case for two pcs 8X40/8341, Matte Black
8341-450B
8341-450B Flush mount kit, Black
For even more technical details please see product operating manual.
Make The Ones for you with 120 new colours!
Use our online colour picker.
The representation of RAL colours is made by courtesy of RAL gGmbH, 53229 Bonn. Please note that this screen tool and the printable colour-selection PDF do not give an accurate representation of RAL colours. Please use the official RAL fan to determine colours before ordering. See also: RAL Colour Document ›
